CNC Programmable

Features:

• Freely programmable micro processor for custom tool geometries
• Freely programmable tooth pitch
• Totally enclosed cabin with end of cycle indicator
• Specially balanced 2 HP grinding motor
• Height sensor with shut off
• Dual pressure saw clamp with swing away arm
• Automatic central lubricating system
• Lift-Off face grinding
• Load Monitor shuts machine down extending machine life
• Up to 1000 blade programs possible
• Remote diagnostic modem
  (Allows for remote troubleshooting & uploading of programs)
  

Standard Machine Includes:

• 10 GPM flood coolant system with filter paper
• Precision saw lift
• Stainless steel shields
• Dual low voltage machine lamps
• Tooth Counter
• Magnetic saw receiver for saw blades with bore sizes (0.5-1.5”)
• Set of saw bushings (1/2, 5/8, 3/4, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2”, 30mm)
  

MACHINE SPECIFICATIONS
Blade Diameters	4 – 34 inch (2 – 40” Option)
Grinding Motor	2 HP
Maximum blade thickness	.75 inch
Grinding Wheel Specs	6” x 1-1/4”
Pneumatic requirements	100 PSI, 2 CFM
Voltage	230/460V, 3Ph, 60Hz
Weight	1900 lbs

     

 

Full Cabin and Siemens Operator Interface shown above

 

TF850-FP Optional Accessories for Tool Holding

• Automatic Saw Plate Thickness Adjustment

Oil Coolant Package

• Cartridge Filtration System -To 5 micron, 15 GPM, includes 2 cartridges & installation kit
• Replacement Cartridges Available in 20 Micron and 5 Micron -2 required
• Mist extraction system for use with Oil coolants, Double Centrifuge Collector with air filter
• 30 gallon Coolant Tank++ Standard tank is 15 gallon
• HEPA clip on filter for smoke elimination++
  

Automatic CO2 Fire Suppression System

Custom designed Pyrogen fire suppression unit for oil coolants++
System uses sensor to automatically dispense CO2 in case of fire or extensive heat. Carbon Dioxide is a clean, dry, non-corrosive, inert gas, which does not damage machine parts.

Tool Holding

• Saw bushings (0.5-1.5” 12-38mm)
• Mag Saw receiver (for bore sizes 1.6-4.0”, 39-101mm)
• Mag saw receiver (4.1-8”, 102-203mm)
• Saw bushings (1.6-3”, 39-76mm)
• Saw bushings (3.1-5”, 77-127mm)
• Saw bushings (5.1-8”, 128-203mm)
• Saw receiver (for saw blade diameters 2-5”)

RECOMMENDED GRINDING WHEELS
6” Diamond Wheel-Top 6A9	180/400 grit	C09006-02
6” Diamond Wheel-Top 6A9	220/600 grit	C09002-01
6” Diamond Wheel-Face 4A2P	180 grit	C06033-02
6” Diamond Wheel-Face 4A2P	400grit	C06049-01
Paper filters 10 pieces	180/400 grit	L-5825

++ Recommended, but not required.