|
Clamex
P was recently selected as a Challengers Award
Finalist, which recognizes
advancements in technology. "The award challenges
IWF exhibiting companies to develop revolutionary, creative,
ingenious, forward-thinking technology, materials, services
or safety devices that advance the industry," according
to the IWF.
.
Click HERE to watch the application video of the new
Clamex P
|
Introducing
the new Clamex P biscuit-shaped connector system:
- Joins any miter angle without glue or screws to create
nearly invisible Ready To Assemble (RTA) connections.
- Clamex P is fast and simple to use--no screws or tools
needed--simply slide connectors in pre-cut slot, match
up joining panels easily with built in alignment tabs,
lock cam lever in place by a turn of a hex key pulling
parts together tightly for a strong, durable connection.
- Parts with Clamex P can be preinstalled, stacked
and packaged without risk of damage during transport.
|
|
| STEP 1: The T-Groove is cut
into the surface or the edge with
a CNC machine, with amounted groove
cutter. |
STEP
2: During the process the cutter cuts into the
work piece until
the required depth is achieved.
|
| |
|
| STEP 3: The 6 mm access hole
is then drilled into the piece |
|
|
|
|
| |
STEP
4: The Clamex P is then inserted by hand into
the T grove, locking perfectly into the work piece for
a strong and tight installation. There is no risk
of tortional movement due to its patented ridge
system, which connects and aligns with only one fitting.
|
FINAL
STEP: The work pieces are then attached together
using a
hexagon key and turning it 90
degrees as shown below. |
FINISHED PRODUCT |
| |
|
| Also
available the Clamex S-
The Knockdown Biscuit from Lamello |
|
| |
Aesthetic constructions.
Demountable, flexible and easy:
- Detachable CAM connector system
- Aligns and draws the joint tightly to provide
a strong connection
- Maximum aesthetics due to minimal hole size
(6mm) for opening and closing of the connection
- No torsional movement due to aligning pins
- Join any miter angle
- Stackable, since no parts protruding the surface
- Easy installation with any Lamello biscuit joiner
- Low investment
- Usable in solid wood and wood composites
- Tolerance lateral +/- 0,5 mm (max. +/- 0,75
mm)
- Made of fibre-glass reinforced plastic
- The alternative to centric dowel cam connections,
i.e. anywhere a Minifix could be used.
- Click
here for CLAMEX S Application video clips
|
| |
| |
| |
| Clamex Accessories:
|
|
|
HW-Reversing blades cutter for 8 mm groove (100
x 22 x 8 mm)
No. 132108 - $160.00
|
|
Drill jig for angles of 35 - 90 degrees including
drill
No. 125240 - $115.00
|
|
Secure
On-line Ordering for Continental U.S. Only
